On To the Vertical Stabilizer

Nov 20,2019

As with the HS, the VS will be assembled with clecoes before the dimpling is completed. The step seen here is the doubler being attached to the rear spar.

IMG_1776.jpeg
The ribs are attached to both the rear spar and front spar.

The ribs are attached to both the rear spar and front spar.

The tape is used to block out  holes to be used for the fairings when they are assembled.

The tape is used to block out holes to be used for the fairings when they are assembled.

Tape here for same reason.

Tape here for same reason.